MG Facia Panels
'N' Series 'P' Series 'T' Series YT
All of our panels are made up as original using first line veneers for best grain patterns and gluing them on the correct thickness of Baltic birch plywood. The panels are cut to shape, holes drilled, and routings are made as original. The panels are finished on both sides using high gloss Polyester, the best finish available for dashboard application.
For all TD panel orders, the following information is needed:
1) if the TD is right-hand or left-hand drive
2) if the TD has an early or late chassis number:
EARLY: 0251 through 10751 = chronometric or flat-faced instruments
LATE: 10702 through 29915 = magnetic or dished face instruments
Non-original holes can be cut and back-routed for lights for special gauges.
MG-NA: Bookmatch burl redwood (sequoia) veneer - $400
MG-NB: Bookmatch burl walnut veneer - $410
MG-PA: Bookmatch burl redwood (sequoia) veneer - $345
MG-PB: Bookmatch burl walnut veneer - $345
TA-TB Tickford: Bookmatch or one piece walnut veneer - $345
TA-TB-TC-YT: Bookmatch or one piece walnut veneer - $325
TD: Bookmatch or one piece walnut veneer - $340
TD-RHD: Bookmatch or one piece walnut veneer - $350
TC-YT: Plywood blank - no veneer - to be fabric covered - $50
TD-LHD: Plywood blank - no veneer - to be fabric covered - $70
TD-RHD: Plywood blank - no veneer - to be fabric covered - $80
Screws for Attaching
— The NA, PA, PB, TA, TB, & early TCs originally used a 1-1/4'' long, #8, slotted, chromed oval head wood screw with no finish washer.
— The later TCs (fabric covered) & YTs used a 1-1/4'' long, #10, slotted, chromed oval head wood screw with a #10 finish washer.
— The TDs used a 1 1/4'' long, #10, Phillips, chromed oval head wood screw with a #10 finish washer
— We supply a special cone washer with no lip for all of veneer panels to keep the screw head from damaging the finish and veneer.
— We will supply the correct screw and washer set - $6.00.
Outside Chrome Edge Trim
— Supply and install as original the correct chrome-plated brass trim:
NA, NB, PA, PB - $178
TA, TB, TC, YT - $153
— Supply and install as original the correct chrome-plated brass trim for the TD which also includes fitting, hinging, and trimming out the glove box door - $333
— Retro chrome hinges, plastic octagon pull and bullet catch for TD - $20
— Chrome plating and repining of original TD glove box door hinges - $80
Fabric-Covered Facia Panels
— We can attach the fabric from your interior kit to a Baltic birch facia panel blank (no veneer) and press it in our laminating press for better bonding - $70
Dashboard Parts to Purchase
We are always looking to purchase new or used dashboard parts no matter what the condition. If it's part of the dashboard, we are interested. Send along your extra bits and we will make you an offer.